Farnborough airfield during the International Airshow: business jets and helicopters lined up on the apron under a wide sky

Farnborough International

Hampshire's exhibition centre: a 12,332 sqm pillar-free Hall 1, Hall 5 and 100,000 sqm outside, next to the airport.

Planning a stand here?

We design, build and hire exhibition stands for this venue from our two UK depots.

Get a free quote

Quick facts

Address
Farnborough International Exhibition & Conference Centre, Gate F, Aerospace Boulevard, Farnborough GU14 6UU
Sat nav postcode
GU14 6UU
Exhibition space
About 20,000 sqm indoors, plus more than 100,000 sqm of hardstanding and grass outside.
Drive time from depot
1 hr 30 mins from our Fordingbridge depot

Halls and spaces

Farnborough International Exhibition & Conference Centre sits on the airfield best known for the Farnborough International Airshow. Its owner, Farnborough International, also runs the Airshow. Exhibitions use two halls, conference rooms on the first floor and a large outdoor area.

  • Hall 1: 12,332 sqm (260m x 45.4m), pillar-free, about 8m high (the height varies, and Hall 1.3 is noticeably lower). Floor load 15kN per sqm, with under-floor ducts carrying three-phase power. Four drive-in roller shutter doors, the largest 7.2m wide x 5.9m high. Rigging beams at about 8m.
  • Hall 5: 3,150 sqm (90m x 35m), clear span, 7.4m high, with a dividing partition. Floor load 7.5kN per sqm. Two drive-in roller shutter doors, each 4.45m wide x 4.25m high.
  • First-floor rooms: Inspire (1,000 sqm, 5.4m high) and Discover (850 sqm) take conference exhibitions and breakout space. Hall 1's goods lift is small (about 2.4m x 1.4m, 2m high, 1,600kg), so plan first-floor kit around it.
  • Outdoor: more than 100,000 sqm of hardstanding and grass, with private roads used for vehicle displays and test drives.

Double-deck stands aren't possible in the height-restricted parts of the halls, so ask for the venue plan first. Layouts, capacities and stand limits are set per event by the organiser, so the exhibitor manual always wins over this guide.

Deadlines and venue services

The venue's own deadlines apply to the organiser, 28 days before the event's tenancy starts, so your organiser will want your paperwork earlier:

  • Complex structures (double-deck and other complex stands) must be notified, with a full submission under Section 47 of the eGuide. Building can't start until the venue approves it.
  • Risk assessments, fire risk assessments and insurance certificates (public liability of at least £10m) are due 28 days before tenancy.
  • CDM: space-only stands are often treated as separate construction sites, so expect to supply RAMS and a construction phase plan.
  • Build power has to be ordered in advance through RME Services.

Stand height limits, fire-retardancy rules and services deadlines are set per show, so check your exhibitor manual.

Separate from the venue's deadlines: aim to order your stand build about five weeks before the show, and allow more time if you can.

Getting there — crew

Road: the venue is just off the A325, reached from the M3 at junction 4. Follow the brown Exhibition Centre signs rather than the sat nav, and enter the venue name plus your gate letter: Gate F is on Aerospace Boulevard, Gate A on Transport Road.

Rail: Farnborough Main is about 1.5 miles away, five minutes by taxi, with trains to London Waterloo in about 35 minutes. Farnborough North, North Camp and Aldershot are about ten minutes by taxi.

Air: Farnborough Airport is next door. Heathrow is about 30 minutes by car and Gatwick about 50.

Parking

The venue has just over 3,500 free parking spaces on hardstanding and grass. Exhibitor and contractor parking is allocated by the organiser after you've unloaded. There are 18 EV chargers, in Car Parks 1 and 4, paid through the Monta app.

Details for each show are on the venue's parking page and in your exhibitor manual.

Getting there — freight

Both halls are drive-in. Hall 1 has four roller shutter doors on the service road, from 6.6m to 7.2m wide and 5.1m to 6m high. Hall 5 has two, each 4.45m wide and 4.25m high. There is no goods lift in Hall 5, and pallet trucks can't go through the fire exits.

  • The speed limit is 10mph on the site roads and 5mph inside the halls. Any vehicle in a hall needs a banksman, and vehicles over 3m high must show their height in the cab.
  • Forklifts are booked through the organiser's Event Manager and must be parked outside overnight: gas cylinders can't stay in the halls.
  • Lorry loaders (hi-abs) and cranes need the venue's permission first, because the site is next to an operational airport.
  • The venue's official logistics supplier is CEVA, and Stadium Management runs event traffic.

Loading and access

From the venue's Organiser Manual (v7, 2025), which builds on the AEV/AEO eGuide:

  • Hi-vis and safety footwear for everyone on site during build and breakdown.
  • No under-16s on site during build or breakdown, and no alcohol.
  • Water-based paint only, and there is no paint wash area on site.
  • No generators or compressors. All mains power comes from the official electrical contractor, RME Services, and build power must be pre-ordered. Stand power goes off 30 minutes after the show closes each day.
  • Nothing may be hung from the hall structure except by the official rigging supplier, Encore.
  • Hand tools inside the halls should be battery-powered where possible; anything used outside must be 110v or battery.
  • No balloons anywhere on site (the airfield is next door), and no breaking ground or staking outdoors.
  • Wi-Fi and data come from the venue's provider: personal hotspots and MiFi devices aren't allowed.

Staying there

Hotels the venue lists include the Aviator Hampshire, Village Hotel Farnborough and Holiday Inn Farnborough, plus serviced apartments nearby, with about 2,500 rooms in the area. Its booking partner, BCD Meetings & Events, shows live rates on the venue's where to stay page.

For a build crew, choose by the drive to the gate, early breakfast and safe van parking, not by stars. From our Fordingbridge depot most Farnborough builds don't need an overnight stay at all.

Eating and client entertaining

Feeding the crew. Catering on site is run by the venue's own team, Fuel Kitchen Co., which also handles on-stand catering. Its menu pack is on the venue's food and drink page. Food sampling on a stand needs paperwork about four weeks before the event.

Taking a client. The Aviator Hampshire, next to the airport, is the obvious choice nearby. Farnborough town centre and Fleet are a short drive for more choice.

Official venue documents

These are the venue's own documents, hosted on its site. Check the resources page for the current versions: the venue re-issues them and the direct links change.

The venue doesn't publish its own exhibitor manual: stand rules and deadlines come from each show's organiser.

Header photo: the airfield during the 2018 Farnborough International Airshow, by Steve Lynes, CC BY 2.0, cropped and resized.

Shows at this venue

Farnborough hosts trade shows in manufacturing, defence and security, plus big consumer shows. Upcoming events on its What's On list include Southern Manufacturing & Electronics, Security and Policing, DPRTE, the Homebuilding & Renovating Show, Naidex, FutureScape and the British Motor Show. The site is also home to the Farnborough International Airshow.

We have built stands here for exhibitors at DPRTE, the defence procurement show.

Dates change from year to year, so check the venue's What's On page and your organiser.

For London's halls, see our ExCeL London, Olympia London and Business Design Centre guides.

Redblu at this venue

Who builds exhibition stands at Farnborough International?

Redblu designs, builds and dismantles exhibition stands at Farnborough International from our Fordingbridge depot in Hampshire, about an hour and a half away. Most clients hire their stand: every stand is built from our own reusable Aluvision and T3 stock, with a named Redblu project manager on site through build and breakdown.

What makes a good stand at Farnborough?

Hall 1 is long, pillar-free and drive-in, so space-only stands can be ambitious. But nothing can be hung from the roof except through Encore, and part of the hall is lower, so check the stand's position on the floor plan before designing height. A modular stand goes up quickly without paint or power tools, which suits the venue's water-based paint and battery-tool rules.

  • Shell scheme upgrades: printed shell scheme graphics sized to the show's shell scheme, which varies by organiser.
  • Space only: a custom stand with storage, meeting space and AV. Double-deck needs a complex-structure submission and isn't possible everywhere.
  • Conference exhibitions: first-floor rooms suit compact backwalls, counters and portable displays that fit the small goods lift.

What to ask a stand builder at Farnborough International

  • Have they built at Farnborough before, and which hall is your stand in?
  • Who sends the drawings, RAMS and, for a complex stand, the Section 47 submission?
  • Has build power been ordered through RME Services, and is any hanging sign going through Encore?
  • Is everything painted with water-based paint, and will they take all waste away?
  • What does the quote leave out? Power, rigging and furniture are usually ordered separately.

Lead time and prices

Aim to order your stand build about five weeks before the show, and allow more time if you can. Package stands are fixed-price hire, from £4,203 + VAT for a 3m x 2m and £4,417 + VAT for a 4m x 3m. Custom stands are priced per design. See the Stand Selector or modular exhibition stands.

Hired stands are reconfigured for your next show, and the frames go back into stock afterwards rather than into a skip. See our sustainability approach.

Built here

Our work at this venue

No items found.
See our previous stands

FAQ

Questions Answered.

Everything you need to know about exhibition stand hire with Redblu.
How quickly can you turn around an exhibition stand?
Do you work with first-time exhibitors?
Can I get a quote without knowing my exact stand size?

Ready to Exhibit?

Ready to Stand Out

at Your Next Show?

Let's talk about your brief. Our team will come back with ideas, a concept, and a clear price no hidden costs, no pressure.
Ready to Stand Out
 at Your Next Show?